3M™ Flexomount™ Plate Mounting Tape 447DL, Gray, 18 in x 36 yd, 10 mil, 1 Roll/Case
3M™ Flexomount™ Plate Mounting Tape 447DL, Gray, 18 in x 36 yd, 10 mil, 1 Roll/Case
3M™ Flexomount™ Plate Mounting Tape 447DL, Gray, 18 in x 36 yd, 10 mil, 1 Roll/Case
SKU
#7000028877
Part #: 62912
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and
packaged for sale to trained industrial and occupational customers for
workplace use. Unless specifically stated otherwise on the applicable
product packaging or literature, these products are not intended,
labeled, or packaged for sale to or use by consumers (e.g., for home,
personal, primary or secondary school, recreational/sporting, or other
uses not described in the applicable product packaging or literature),
and must be selected and used in compliance with applicable health and
safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all
product literature, user instructions, warnings, and other limitations,
and the user must take any action required under any recall, field
action, or other product use notice. Misuse of 3M industrial and
occupational products may result in injury, sickness, death, or property
damage. For help with product selection and use, consult your on-site
safety professional, industrial hygienist, or other subject matter
expert.
3M™ Flexomount™ Plate Mounting Tape 447DL is a double liner, double coated tape designed for mounting photopolymer and rubber printing plates to flexographic printing cylinders or sleeves. The adhesive is specially formulated for clean removal from both the plate and the print cylinder or sleeve.
3M™ Flexomount™ Plate Mounting Tape 447DL features a soft rubber adhesive that offers excellent adhesion to both rubber and photopolymer plates. The high adhesion helps reduce the tendency for plate edge lifting and makes it a good choice for long runs. This gray double coated tape helps provide uniform coverage of solids when halftone dot reproduction is not critical.
Recommended Applications:
Mounting photopolymer print plates to flexographic printing cylinders or sleeves
Mounting rubber printing plates to flexographic printing cylinders or sleeves
Keep the Presses Running and your Customers Coming Back
For decades, 3M products have been at work in paper mills and printing plants helping to improve the quality of the work that goes out and the efficiency of how it gets done. From paper web splicing to plate mounting and packaging the finished job, you can rely on 3M for solutions and service throughout your operation.
Offers excellent adhesion to both rubber and photopolymer plates
Provides uniform coverage of solids when halftone dot reproduction is not critical
Specially formulated for clean removal from plate and print cylinder or sleeve