3M™ VentureClad™ Insulation Jacketing Tape 1577CW-WM, White, 4 in x 50 yd, 4 Rolls/Case

Name: 3M™ VentureClad™ Insulation Jacketing Tape 1577CW-WM, White, 4 in x 50 yd, 4 Rolls/Case
Brand: 3M
SKU: 7100116999

SKU

#7100116999

Part #: 98281

Call for Availability

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

3M™ VentureClad™ Insulation Jacketing System 1577CW-WM is used for cladding and jacketing applications and creates a vapor barrier for HVAC, ductwork, vessels and pipes. This conformable tape is able to conform to a curved or irregular surface. It offers zero permeability, installs without special tools and is highly puncture and tear resistant - ideal for any indoor or outdoor task. This laminate tape can withstand temperatures as cold as -40 °F/-40 °C and as hot as 248 °F/120 °C. It’s suitable for use on materials like fiberglass, polystyrene and conformable aerogel. It protects insulation against mold, UV, weather, oil and grease, chemicals, impact and mechanical abuse, corrosion under insulation (CUI). This tape qualifies for compliance credit for LEED® v4 and is UL723 classified. 3M™ VentureClad™ Insulation Jacketing System 1577CW-WM provides a reliable barrier and protection during jacketing and cladding operations.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Specifications

More Information
Specification(s)
UPC Code	00076308982812
Adhesive Type	Acrylic
Backing (Carrier) Thickness (Imperial)	5.0 mil
Color Family	White
Elongation at Break	80.0 %
Overall Length (Imperial)	45.72 yd
Overall Width (Imperial)	4.0 in
Product Color	White
Product Number	1577CW-WM
Tensile Strength (Imperial)	69.0 lb/in
Total Tape Thickness without Liner (Imperial)	7.0 mil
Country of Origin	USA
Unit of Use - Customary Net Weight	4.263 LBS
Shipping Quantity	4.0
Brand	3M

Product Information

Zero Permeability Cladding and Jacketing

The white aluminum exterior provides an attractive aesthetic for cladding that is visible when finished while also providing excellent chemical resistance. It provides zero permeability and acts as a vapor barrier for insulation cladding and jacketing applications. This tape was tested in accordance with ASTM E84. The self-adhesive material cuts and installs easily on-site and without the use of special tools. The backing is flexible to conform to curved and irregular surfaces with ease. 3M™ VentureClad™ Insulation Jacketing Tape 1577CW-WM meets or exceeds most building code requirements – for more information on specific approvals, please refer to the technical data sheet.

Adheres in Cold Temperatures

3M™ VentureClad™ Insulation Jacketing Tape 1577CW-WM features an aggressive pressure sensitive acrylic adhesive that bonds and seals well in cold temperatures. This adhesive adheres immediately on contact to a variety of materials such as fiberglass, faced fiberglass insulation, mineral wool, polystyrene and flexible aerogel. It applies easily at temperatures as cold as -10°F/-23°C. It can operate at a service temperature as low as -94°F/-70°C and as high as 300°F/149°C. Once bonded, this tape will provide good holding power for extended periods with good aging properties and resists lifting and curling over time.

This product is used to protect insulation against UV, ozone, high humidity, salt spray, weather, oil and grease, aggressive chemicals, impact and mechanical abuse, corrosion under insulation (CUI), and moisture vapor intrusion. It works well with many insulation types. Qualifies for compliance credit for LEED®. Additionally, it meets the FDA compositional requirements for indirect food contact.

Recommended Applications

Vapor barrier for insulation cladding and jacketing operations such as HVAC ductwork and piping

Interior and exterior ductwork (rectangular/round), pipes (straight runs, bends, intersections), and vessels

Weather protection system in extreme environmental conditions

The Science of Better Adhesion from 3M

Since 1925 when a lab assistant invented masking tape, 3M has been applying science to life – developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each industrial tape and adhesive like 3M™ VentureClad™ Insulation Jacketing Tape 1577CW-WM to help businesses operate faster, better and more efficiently.

Zero permeability provides an absolute vapor barrier for sealing applications

Cold weather acrylic adhesive applies easily at temperatures as cold as -10°F/-23°C

10-year 3M warranty when applied per 3M installation guidelines

High puncture and tear resistance ensure longevity and durability in a variety of applications and environmental conditions

Qualifies for compliance credit for LEED®

Flexible backing conforms to irregular and curved surfaces

Easy to cut and install on-site without special tools or application methods