Toggle Nav

3M™ Temflex™ Vinyl Corrosion Protection Tape 1100, 2 in x 100 ft, Unprinted, Black, 24 rolls/Case

3M™ Temflex™ Vinyl Corrosion Protection Tape 1100, 2 in x 100 ft, Unprinted, Black, 24 rolls/Case

SKU
#7000005813
Part #: 09061
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.

For industrial/occupational use only. Not for consumer sale or use.


3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.


3M™ Temflex™ Tape 1100 is a general use, 10 mil thick, printed tape with corrosion protection. This tape is designed to help protect conduits, pipes and metallic cable jackets. The tape resists abrasion, punctures and electrolytic actions that are buried above or below the ground. It withstands a wide temperature range of 10 to 120 °F ( 12 to 49 °C).
More Information
Specification(s)
Part number1100UP-2X100FT
UPC Code00054007090618
Adhesive MaterialRubber Resin
Adhesive TypeRubber
ApplicationElectrical Maintenance
Application MethodSelf-adhered
Application Temperature Range10–120°F (-12–49°C)
Application/IndustryMining
Backing (Carrier) MaterialVinyl
Backing MaterialPVC
Breaking Strength (Imperial)25.0 lb/in
Color FamilyBlack
Elongation200.0 %
Elongation at Break2
Maximum Installation Temperature (Fahrenheit)120.0 Degree Fahrenheit
Maximum Operating Temperature (Fahrenheit)176.0 Degree Fahrenheit
Operating Temperature Range (Fahrenheit)-55 °F to 176° F
Overall Length (Imperial)100.0 ft
Overall Width (Imperial)2.0 in
Performance LevelGeneral Use
Printed TapeNo
Product ColorBlack
Product FormRoll
Product MarketsElectrical Construction
Product TypeCorrosion Protection Tape
RoHS EU CommentsRoHS 2011/65/EU compliant without exemption
Rolls per Carton1.0
Rolls per Case24.0
Tape ColorBlack
Tape GradeGeneral Use
Tape Thickness (Imperial)10.0
Tape TypeCorrosion Protection
Total Tape Thickness without Liner (Imperial)10.0 mil
Total Thickness0.254 mm
UV ResistantYes
Country of OriginTAI
Unit of Use - Customary Net Weight1.095 LBS
Shipping Quantity24.0
Brand3M

3M Temflex Vinyl Corrosion Protection Tape 1100 is a 10-mil thick, general-use, PVC tape especially formulated for corrosion protection of pipes, conduits and metallic cable jackets. This protective tape resists salt water, sunlight, and corrosive elements, including compounds of chlorine, bromine, sodium and lithium. This tape adhesive is designed to perform with outdoor use, above or below ground.


  • Resists weather-induced cracking and corrosion from acids, alkalies and other corrosive materials
  • Easy to apply and provides protection against abrasion, puncture, tears, corrosion and electrolytic action
  • Usable indoors and outdoors with an application temperature range of 10F to 120F (-12C to 49C)
  • Tape available in Unprinted or Printed version 1100P
  • High Dielectric Strength and insulation resistance
  • RoHS 2011/65/EU Compliant
  • For industrial/occupational use only. Not for consumer sale or use.